- Internal pressure large flow filter cartridge EPD Series
- EPD series high-flow filter cartridge adopts 6" large diameter structure with one-way opening. The liquid flows from the inside to the outside to ensure that the particles are intercepted inside the filter cartridge. It is made of high-purity polypropylene filter material and support layer by hot-melt welding. Without any adhesive and other additives, with extremely low levels of extractables. Wide chemical compatibility is suitable for filtration needs in various fields.
- EPD Series.pdf INQUIRY NOW
- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW
- Hydrophobic gas sterilization polyethersulfone (PES) filter cartridge
- Eternalwater EST Series--Gas sterilization polyethersulfone filter cartridges adopt
hydrophobic polyethersulfone membrane,which has superior performance of high flow
rate, low pressure drop, high temperature resistance and high retention rate. Mainly
used in gas sterilization and filtration of biological fermentation, pharmaceutical industry
- EST Series.pdf INQUIRY NOW
- KBLV0455TZ Sterilizing grade capsule filter 5inch KB Series
- Eternalwater KBLV0455TZ Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
- KB Series.pdf INQUIRY NOW
- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW
- Seven-core capsule filter Used for high flow rate EAH Series
- EAH Series seven-core capsule filter adopts an integrated design. On the basis of meeting the gradient winding structure of the polypropylene filter material, the filter area is increased by increasing the number of winding filter elements, effectively improving the filtration efficiency, thereby achieving the effect of long service life.
- EAH Series.pdf INQUIRY NOW
- Multi-core sanitary liquid filter HYD Series
- Cylinder, head, flange, connecting pipe, welding rod and other materials are strictly selected and processed finely. It can be designed according to the requirements of the flow rate and meets the requirements of sanitation and GMP. mechanicalpolished, no sanitary dead corners, easy to clean, no residue.Easy disassembly and installation, scientific structure and many types. Widely used in biopharmaceutical, food and beverage industries.
- HYD Series.pdf INQUIRY NOW
- Nylon 66 sterilizing grade filter cartridge
- Eternalwater EYNN Series--Filter cartridges are made of natural hydrophilic nylon (Nylon) 66 membrane, which can absorb and remove particles, bacteria and endotoxin smaller than the filtration precision. High porosity and high flow rate are suitable for alkaline liquid filtration.
- EYNN Series.pdf INQUIRY NOW
- Double-layer polyethersulfone(PES) severe terminal sterilization grade filter cartridge
- Eternalwater EDPSH series--Filter cartridges adopt a combination of double-layer membranes
with different pore sizes or the same pore size, and a highly asymmetric pore structure
polyethersulfone membrane, which makes the filter cartridge have excellent filtration performance
and reliable bacterial retention capacity. It can be widely used in severe terminal sterilization and
filtration in industries such as bio-pharmaceutical industry.
- EDPSH Series.pdf INQUIRY NOW
- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW
- Bag type large flow filter element END Series
- END series bag-type high-flow filter Cartridges are innovations and breakthroughs in the design and production of traditional bag filters. It can be directly installed in the filters of No. 1 and No. 2 filter bags without further modification to save investment costs. The pleated structure has a larger filtering area and dirt holding capacity, which prolongs the service life and reduces the number of times the filter needs to be replaced. It is easy to install and operate.
- END Series.pdf INQUIRY NOW
- Security filter HRM series
- HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
- HRM series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge E100D Series
- E100D series high-flow filter cartridge adopts a diameter of 100mm and high 226 end cap , which is suitable for medium-flow filtration occasions . The external protection of the filter cartridge adopts PP polypropylene rhombic mesh to protect the filter material from deformation .
- E100D Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW
- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW
- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW
- Liquid filter bag ELD series
- ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and
colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
- ELD series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EYD Series
- The EYD series has a large flow rate of up to 6.7 inches and a large diameter structure with
a high-strength polypropylene support frame inside, and a polypropylene mesh or PP frame for external support. The effective filtration area is greatly increased, the dirt holding capacity
can be increased, the number of filter cartridges and the size of the shell can be reduced, and the input cost can be saved.
- EYD Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical