Home About Us Application Products FAQs News Contact us
EN EN
Products


Home Products paper factory waste water treatment
Product Categories

paper factory waste water treatment

    Outside pressure large flow filter cartridge EFD Series
    Outside pressure large flow filter cartridge EFD Series
    The inner frame of EFD series PHOSPHOR style large flow filter cartridge is made of glass fiber reinforced polypropylene material, wrapped with nylon plastic woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
    EFD Series.pdf INQUIRY NOW
    High bubble point and long life polyethersulfone（PES) sterilization grade filter cartridge
    High bubble point and long life polyethersulfone（PES) sterilization grade filter cartridge
    Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt imported asymmetrical unsupported PES membrane, its pore size gradually decreases with depth, this structure maintains a certain Consistent porosity and retention. All elements of the filter cartridge comply with FDA regulations for food contact use. It has high retention rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical industry.
    EAPSH Series.pdf INQUIRY NOW
    Small size diameter 56mm filter cartridge
    Small size diameter 56mm filter cartridge
    Eternalwater E56X series--filter cartridges have characteristics of compact structure, small volume, and less loss of filter media.Designed for small-volume gas and liquid filtration, widely used in laboratory small-volume filtration.
    E56X Series.pdf INQUIRY NOW
    Large flow filter housing HJM series
    Large flow filter housing HJM series
    HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
    HJM series.pdf INQUIRY NOW
    KBLV0225TG Sterilizing grade capsule filter 5inch KB Series
    KBLV0225TG Sterilizing grade capsule filter 5inch KB Series
    Eternalwater KB series--KBLV0225TG Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
    KB Series.pdf INQUIRY NOW
    Sanitary grade pipe filter HG Series
    Sanitary grade pipe filter HG Series
    In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel, which has good corrosion resistance, and the design and manufacture meet the requirements of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
    HG Series.pdf INQUIRY NOW
    Sterilizing grade capsule filter 0.5inch / 1inch KC Series
    Sterilizing grade capsule filter 0.5inch / 1inch KC Series
    Eternalwater KC series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
    KC Series.pdf INQUIRY NOW
    EW-F48 Series Automated Filter Integrity Tester
    EW-F48 Series Automated Filter Integrity Tester
    The EW-F48 automated filter integrity tester is a microcomputerized, intelligent, and high-sensitivity precision analysis instrument independently developed by Hangzhou Eternalwater Filtration Equipment Co., Ltd. It is specially used to test the integrity of filter cartridges or membranes in filtration systems. The instrument enables a variety of standard functions, including forward flow test, bubble point test, water intrusion test, combined test of forward flow and bubble point , etc. At the same time of testing, the instrument can automatically perform self-test, automatically control the stabilization time and test time, store and print the current test results, etc.; historical data is displayed graphically to reflect changes in test time and gas flow rate more intuitively.
    EW-F48 Series Automated Filter Integrity Tester.pdf INQUIRY NOW
    Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
    Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
    Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the integrity test before leaving the factory ensures the high quality of the product.
    EHPSH Series.pdf INQUIRY NOW
    Security filter HRM series
    Security filter HRM series
    HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
    HRM series.pdf INQUIRY NOW
    External pressure melt-blown (PP cotton) filter cartridge ERP Series
    External pressure melt-blown (PP cotton) filter cartridge ERP Series
    ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
    ERP Series.pdf INQUIRY NOW
    Multi-core sanitary liquid filter HYD Series
    Multi-core sanitary liquid filter HYD Series
    Cylinder, head, flange, connecting pipe, welding rod and other materials are strictly selected and processed finely. It can be designed according to the requirements of the flow rate and meets the requirements of sanitation and GMP. mechanicalpolished, no sanitary dead corners, easy to clean, no residue.Easy disassembly and installation, scientific structure and many types. Widely used in biopharmaceutical, food and beverage industries.
    HYD Series.pdf INQUIRY NOW
    Depth Filter Cartridge ESP Series
    Depth Filter Cartridge ESP Series
    The ESP Series depth filter cartridge is made of polypropylene (PP) filter material and is suitable for gel removal and pre-filtration of the liquid with high particle impurity content, which can greatly improve filtration stability and reduce the penetration of gel and particle impurities.
    ESP Series.pdf INQUIRY NOW
    Internal pressure large flow filter cartridge EPD Series
    Internal pressure large flow filter cartridge EPD Series
    EPD series high-flow filter cartridge adopts 6" large diameter structure with one-way opening. The liquid flows from the inside to the outside to ensure that the particles are intercepted inside the filter cartridge. It is made of high-purity polypropylene filter material and support layer by hot-melt welding. Without any adhesive and other additives, with extremely low levels of extractables. Wide chemical compatibility is suitable for filtration needs in various fields.
    EPD Series.pdf INQUIRY NOW
    Strong adsorption capacity activated carbon fiber filter cartridge
    Strong adsorption capacity activated carbon fiber filter cartridge
    Eternalwater EJA Series--High-performance purification grade activated carbon fiber filter cartridges adopt ACF material, which has high flow rate and high retention rate performance, and is used for purification, deodorization, decolorization, and organic matter removal. Effectively filter out residual chlorine in liquid and gas.
    EJA Series.pdf INQUIRY NOW
    Liquid filter bag ELD series
    Liquid filter bag ELD series
    ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
    ELD series.pdf INQUIRY NOW
    Metal filter cartridge
    Metal filter cartridge
    Eternalwater EWK series--metal filter cartridges are made of five layers of 316L or 304 stainless steel sintered mesh by vacuum sintering or stainless steel dense mesh by folding and welding. It has the properties of high pressure resistance, high temperature resistance, corrosion resistance, good mechanical properties and easy regeneration. Suitable for liquid filtration under high temperature and high pressure conditions.
    EWK Series.pdf INQUIRY NOW

pleated filter cartridge suppliers pleated filter cartridge capsule filter 0.2 um high flow filters cartridge 0.2 micron capsule filter filter housing sus304 capsule filter membrane pleated filter cartridge capsule filter suppliers capsule filter medical

  • Subscribe for Join Us!
  • Join us and get detail information,technical parameter and new products etc.
CopyRight © Hangzhou Eternalwater Filtration Equipment Co., Ltd. 2002-2024