- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW
- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW
- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EKD Series
- EKD series high-flow filter cartridge adopts large diameter (6 " ) structure, folded and welded. It has a high-strength polypropylene support frame inside, and the liquid flow direction is from the outside to the inside. The external support is an integral polypropylene frame and Polyester filter. Two kinds of structures.Special structure makes it have a larger filtration area .
- EKD Series.pdf INQUIRY NOW
- Nylon 66 sterilizing grade filter cartridge
- Eternalwater EYNN Series--Filter cartridges are made of natural hydrophilic nylon (Nylon) 66 membrane, which can absorb and remove particles, bacteria and endotoxin smaller than the filtration precision. High porosity and high flow rate are suitable for alkaline liquid filtration.
- EYNN Series.pdf INQUIRY NOW
- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW
- Internal pressure large flow filter cartridge EPD Series
- EPD series high-flow filter cartridge adopts 6" large diameter structure with one-way opening. The liquid flows from the inside to the outside to ensure that the particles are intercepted inside the filter cartridge. It is made of high-purity polypropylene filter material and support layer by hot-melt welding. Without any adhesive and other additives, with extremely low levels of extractables. Wide chemical compatibility is suitable for filtration needs in various fields.
- EPD Series.pdf INQUIRY NOW
- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW
- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW
- Multi-core sanitary liquid filter HYD Series
- Cylinder, head, flange, connecting pipe, welding rod and other materials are strictly selected and processed finely. It can be designed according to the requirements of the flow rate and meets the requirements of sanitation and GMP. mechanicalpolished, no sanitary dead corners, easy to clean, no residue.Easy disassembly and installation, scientific structure and many types. Widely used in biopharmaceutical, food and beverage industries.
- HYD Series.pdf INQUIRY NOW
- Strong adsorption capacity activated carbon fiber filter cartridge
- Eternalwater EJA Series--High-performance purification grade activated carbon fiber filter cartridges adopt ACF material, which has high flow rate and high retention rate performance, and is used for purification, deodorization, decolorization, and organic matter removal. Effectively filter out residual chlorine in liquid and gas.
- EJA Series.pdf INQUIRY NOW
- Titanium metal filter cartridge
- Eternalwater EBT series--adopt high-purity titanium powder (99.6%), which be sintered at high temperature. The surface particles are not easy to fall off, with average pore size and strong resistance of acid , alkali, high temperature, high pressure, anti-oxidation. Widely used in various industries of liquid of containing rigid particles, gas purification, and separation filtration.
- EBT Series.pdf INQUIRY NOW
- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW
- Single core sanitary liquid filter HY1 Series
- Single core stainless steel liquid filter, made of SUS316L stainless steel. One filter cartridge is used as the filter cartridge, and the design meets the requirements of sanitation and GMP. Mechanical polishing, no sanitary dead corners, small flow resistance, acid and alkali resistance, corrosion resistance, convenient cleaning and disinfection, etc. It is suitable for the filtration of small flow in the pharmaceutical and food industries.
- HY1 Series.pdf INQUIRY NOW
- Stainless steel gas filter HQ Series
- The stainless steel gas filter is specially designed and manufactured for gas filtration. It can be used in sterile gas and fermentation gas filtration with PTFE gas sterilization filter cartridge or glass fiber filter cartridge. The filter cartridge is lined with stainless steel, which can withstand high temperature gas filtration, high accuracy, high flow to ensure filtration efficiency and cost of use.
- HQ Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical