- Bag type large flow filter element END Series
- END series bag-type high-flow filter Cartridges are innovations and breakthroughs in the design and production of traditional bag filters. It can be directly installed in the filters of No. 1 and No. 2 filter bags without further modification to save investment costs. The pleated structure has a larger filtering area and dirt holding capacity, which prolongs the service life and reduces the number of times the filter needs to be replaced. It is easy to install and operate.
- END Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EMD Series
- EMD series high-flow filter cartridge adopts high-performance polypropylene membrane/glass fiber membrane, and the pleated design makes the filter cartridge have a larger effective filtration area. Ergonomically designed end handles ensure quick and easy installation and removal. The twist-to-lock design provides a reliable mechanical seal.
- EPD Series.pdf INQUIRY NOW
- Backwashable string wound filter cartridges E70D-L Series
- E70D-L series string wound filter cartridges are generally used in the condensate polishing system of power plants. The condensate polishing powder resin covered filter requires stable operation at a relatively high temperature. Its high strength can fully withstand the instantaneous high-pressure impact generated during resin bursting and backwashing.
The filter cartridge is controlled by computer, and it is made by winding PP cotton thread or absorbent cotton thread precisely on 304 stainless steel porous skeleton. Ensure that the filter cartridge does not deform, avoid fiber shedding, and ensure the safe operation of the system.
- E70D-L Series.pdf INQUIRY NOW
- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW
- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW
- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW
- Disposable disc filter 50mm KS Series
- Eternalwater KS series--Disposable disc filters can be equipped with a variety of membrane materials, which are widely used in biopharmaceutical industry, laboratories and other processes. Suitable for small flow liquid and gas sterilization filtration, 100% integrity testing.
- KS Series.pdf INQUIRY NOW
- Double-layer polyethersulfone(PES) severe terminal sterilization grade filter cartridge
- Eternalwater EDPSH series--Filter cartridges adopt a combination of double-layer membranes
with different pore sizes or the same pore size, and a highly asymmetric pore structure
polyethersulfone membrane, which makes the filter cartridge have excellent filtration performance
and reliable bacterial retention capacity. It can be widely used in severe terminal sterilization and
filtration in industries such as bio-pharmaceutical industry.
- EDPSH Series.pdf INQUIRY NOW
- Syringe filter
- Eternalwater KZ series--syringe filters are suitable for prefiltration of small amount of samples in the laboratory, clarification and removal of particles, and sterilizing filtration of liquids and gases. Low adsorption to samples ensures maximum sample recovery. The housing is made of polypropylene (PP), which has excellent chemical stability. A variety of filter membranes and specifications are available.
- KZ Series.pdf INQUIRY NOW
- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW
- Sterilizing grade capsule filter 2 inch / 4 inch KMT Series
- Eternalwater KMT series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KMT Series.pdf INQUIRY NOW
- External pressure large flow filter cartridge EBMD Series
- EBMD series 226 connector high-flow filter cartridge adopts deep layer fine polypropylene fiber membrane as the core filter material of the filter cartridge. The large diameter provides a larger filtration area, the internal design center rod strengthens the support, the cross handle design is convenient for installation and removal, and the flow direction is from outside to inside. Can replace imported models: HF40PP005, HF40PP040, HF40PP010, HF40PP070, HF40PP100
- EBMD Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EKD Series
- EKD series high-flow filter cartridge adopts large diameter (6 " ) structure, folded and welded. It has a high-strength polypropylene support frame inside, and the liquid flow direction is from the outside to the inside. The external support is an integral polypropylene frame and Polyester filter. Two kinds of structures.Special structure makes it have a larger filtration area .
- EKD Series.pdf INQUIRY NOW
- Titanium metal filter cartridge
- Eternalwater EBT series--adopt high-purity titanium powder (99.6%), which be sintered at high temperature. The surface particles are not easy to fall off, with average pore size and strong resistance of acid , alkali, high temperature, high pressure, anti-oxidation. Widely used in various industries of liquid of containing rigid particles, gas purification, and separation filtration.
- EBT Series.pdf INQUIRY NOW
- Security filter HRM series
- HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
- HRM series.pdf INQUIRY NOW
- Bag filter HDL series
- HDL series stainless steel bag filter is made of SUS316L or SUS304 stainless steel. O-shaped sealing design and properly configured sealing ring links ensure reliable system sealing , whether it is a single-bag or multi-bag filter . The built-in filter basket prevents the filter bag from sinking under working pressure and ensures no spillage. It can be used for coarse filtration, medium filtration or fine filtration. It is widely used in industrial water, pharmaceutical water, food and beverage industry, electronics industry, etc.
- HDL series.pdf INQUIRY NOW
- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW
- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW
- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW
- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical