100μm micron 60 inch PP high flow Filters cartridge
- Multi-core sanitary liquid filter HYD Series
- Cylinder, head, flange, connecting pipe, welding rod and other materials are strictly selected and processed finely. It can be designed according to the requirements of the flow rate and meets the requirements of sanitation and GMP. mechanicalpolished, no sanitary dead corners, easy to clean, no residue.Easy disassembly and installation, scientific structure and many types. Widely used in biopharmaceutical, food and beverage industries.
- HYD Series.pdf INQUIRY NOW
- Bag type large flow filter element END Series
- END series bag-type high-flow filter Cartridges are innovations and breakthroughs in the design and production of traditional bag filters. It can be directly installed in the filters of No. 1 and No. 2 filter bags without further modification to save investment costs. The pleated structure has a larger filtering area and dirt holding capacity, which prolongs the service life and reduces the number of times the filter needs to be replaced. It is easy to install and operate.
- END Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW
- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW
- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW
- KBLV0455TZ Sterilizing grade capsule filter 5inch KB Series
- Eternalwater KBLV0455TZ Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
- KB Series.pdf INQUIRY NOW
- Backwashable string wound filter cartridges E70D-L Series
- E70D-L series string wound filter cartridges are generally used in the condensate polishing system of power plants. The condensate polishing powder resin covered filter requires stable operation at a relatively high temperature. Its high strength can fully withstand the instantaneous high-pressure impact generated during resin bursting and backwashing.
The filter cartridge is controlled by computer, and it is made by winding PP cotton thread or absorbent cotton thread precisely on 304 stainless steel porous skeleton. Ensure that the filter cartridge does not deform, avoid fiber shedding, and ensure the safe operation of the system.
- E70D-L Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge E100D Series
- E100D series high-flow filter cartridge adopts a diameter of 100mm and high 226 end cap , which is suitable for medium-flow filtration occasions . The external protection of the filter cartridge adopts PP polypropylene rhombic mesh to protect the filter material from deformation .
- E100D Series.pdf INQUIRY NOW
- Nylon 66 sterilizing grade filter cartridge
- Eternalwater EYNN Series--Filter cartridges are made of natural hydrophilic nylon (Nylon) 66 membrane, which can absorb and remove particles, bacteria and endotoxin smaller than the filtration precision. High porosity and high flow rate are suitable for alkaline liquid filtration.
- EYNN Series.pdf INQUIRY NOW
- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EHMD Series
- The EHMD series high flow filter cartridge adopts the horizontal folding design to maximize the effective filtering surface of the filter cartridge. High-performance
polypropylene fiber membrane is used as the filter material, which optimizes its filtration performance to ensure its high-efficiency interception.
- EPD Series.pdf INQUIRY NOW
- Liquid filter bag ELD series
- ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and
colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
- ELD series.pdf INQUIRY NOW
- Hydrophobic gas sterilization polyethersulfone (PES) filter cartridge
- Eternalwater EST Series--Gas sterilization polyethersulfone filter cartridges adopt
hydrophobic polyethersulfone membrane,which has superior performance of high flow
rate, low pressure drop, high temperature resistance and high retention rate. Mainly
used in gas sterilization and filtration of biological fermentation, pharmaceutical industry
- EST Series.pdf INQUIRY NOW
- External pressure large flow filter cartridge EBMD Series
- EBMD series 226 connector high-flow filter cartridge adopts deep layer fine polypropylene fiber membrane as the core filter material of the filter cartridge. The large diameter provides a larger filtration area, the internal design center rod strengthens the support, the cross handle design is convenient for installation and removal, and the flow direction is from outside to inside. Can replace imported models: HF40PP005, HF40PP040, HF40PP010, HF40PP070, HF40PP100
- EBMD Series.pdf INQUIRY NOW
- Hydrophilic PTFE sterilization grade filter cartridge
- Eternalwater ELT Series--Sterilizing filter cartridges adopt hydrophilic polytetrafluoroethylene
(PTFE)membrane. Filter cartridge does not require pre-wetting passes Pseudomonas diminuta
(ATCC ® 19146) retention test. It can be used for sterilization and filtration of medicinal liquids
Hydrophilic PTFE sterilization grade filter cartridge ELT Series
containing organic solvents in the pharmaceutical industry
- ELT Series.pdf INQUIRY NOW
- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW
- Metal filter cartridge
- Eternalwater EWK series--metal filter cartridges are made of five layers of 316L or 304 stainless steel sintered mesh by vacuum sintering or stainless steel dense mesh by folding and welding. It has the properties of high pressure resistance, high temperature resistance, corrosion resistance, good mechanical properties and easy regeneration. Suitable for liquid filtration under high temperature and high pressure conditions.
- EWK Series.pdf INQUIRY NOW
- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical