0.5μm micron 30 inch PVDF pleated filter cartridge
- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW
- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW
- Gas sterilization grade PTFE filter cartridge
- Eternalwater EKT Series--Gas sterilizing filter cartridges adopt hydrophobic (PTFE ) membrane,
which has superior performance of high flow rate, low pressure drop, high temperature resistance
and high retention rate.Mainly used in gas sterilization and filtration of biological fermentation,
pharmaceutical industry
- EKT Series.pdf INQUIRY NOW
- Depth Filter Cartridge ESP Series
- The ESP Series depth filter cartridge is made of polypropylene (PP) filter material and is suitable for gel removal and pre-filtration of the liquid with high particle impurity content, which can greatly improve filtration stability and reduce the penetration of gel and particle impurities.
- ESP Series.pdf INQUIRY NOW
- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge E100D Series
- E100D series high-flow filter cartridge adopts a diameter of 100mm and high 226 end cap , which is suitable for medium-flow filtration occasions . The external protection of the filter cartridge adopts PP polypropylene rhombic mesh to protect the filter material from deformation .
- E100D Series.pdf INQUIRY NOW
- Double-layer polyethersulfone(PES) severe terminal sterilization grade filter cartridge
- Eternalwater EDPSH series--Filter cartridges adopt a combination of double-layer membranes
with different pore sizes or the same pore size, and a highly asymmetric pore structure
polyethersulfone membrane, which makes the filter cartridge have excellent filtration performance
and reliable bacterial retention capacity. It can be widely used in severe terminal sterilization and
filtration in industries such as bio-pharmaceutical industry.
- EDPSH Series.pdf INQUIRY NOW
- Multi-core sanitary liquid filter HYD Series
- Cylinder, head, flange, connecting pipe, welding rod and other materials are strictly selected and processed finely. It can be designed according to the requirements of the flow rate and meets the requirements of sanitation and GMP. mechanicalpolished, no sanitary dead corners, easy to clean, no residue.Easy disassembly and installation, scientific structure and many types. Widely used in biopharmaceutical, food and beverage industries.
- HYD Series.pdf INQUIRY NOW
- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW
- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW
- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW
- Bag type large flow filter element END Series
- END series bag-type high-flow filter Cartridges are innovations and breakthroughs in the design and production of traditional bag filters. It can be directly installed in the filters of No. 1 and No. 2 filter bags without further modification to save investment costs. The pleated structure has a larger filtering area and dirt holding capacity, which prolongs the service life and reduces the number of times the filter needs to be replaced. It is easy to install and operate.
- END Series.pdf INQUIRY NOW
- KBLV0225TG Sterilizing grade capsule filter 5inch KB Series
- Eternalwater KB series--KBLV0225TG Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
- KB Series.pdf INQUIRY NOW
- Liquid filter bag ELD series
- ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and
colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
- ELD series.pdf INQUIRY NOW
- Microporous membrane ML Series
- Eternalwater microporous membranes ML series--can provide various materials and different pore sizes according to different filtration requirements. It is suitable for laboratory liquid analysis and filtration, etc.
- ML Series.pdf INQUIRY NOW
- Bag filter HDL series
- HDL series stainless steel bag filter is made of SUS316L or SUS304 stainless steel. O-shaped sealing design and properly configured sealing ring links ensure reliable system sealing , whether it is a single-bag or multi-bag filter . The built-in filter basket prevents the filter bag from sinking under working pressure and ensures no spillage. It can be used for coarse filtration, medium filtration or fine filtration. It is widely used in industrial water, pharmaceutical water, food and beverage industry, electronics industry, etc.
- HDL series.pdf INQUIRY NOW
- Single core sanitary liquid filter HY1 Series
- Single core stainless steel liquid filter, made of SUS316L stainless steel. One filter cartridge is used as the filter cartridge, and the design meets the requirements of sanitation and GMP. Mechanical polishing, no sanitary dead corners, small flow resistance, acid and alkali resistance, corrosion resistance, convenient cleaning and disinfection, etc. It is suitable for the filtration of small flow in the pharmaceutical and food industries.
- HY1 Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EKD Series
- EKD series high-flow filter cartridge adopts large diameter (6 " ) structure, folded and welded. It has a high-strength polypropylene support frame inside, and the liquid flow direction is from the outside to the inside. The external support is an integral polypropylene frame and Polyester filter. Two kinds of structures.Special structure makes it have a larger filtration area .
- EKD Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical