0.05μm micron 30 inch PP pleated filter cartridge
- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW
- Depth Filter Cartridge ESP Series
- The ESP Series depth filter cartridge is made of polypropylene (PP) filter material and is suitable for gel removal and pre-filtration of the liquid with high particle impurity content, which can greatly improve filtration stability and reduce the penetration of gel and particle impurities.
- ESP Series.pdf INQUIRY NOW
- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EHMD Series
- The EHMD series high flow filter cartridge adopts the horizontal folding design to maximize the effective filtering surface of the filter cartridge. High-performance
polypropylene fiber membrane is used as the filter material, which optimizes its filtration performance to ensure its high-efficiency interception.
- EPD Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EFD Series
- The inner frame of EFD series PHOSPHOR style large flow filter cartridge is made of glass fiber reinforced polypropylene material, wrapped with nylon plastic woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EFD Series.pdf INQUIRY NOW
- Security filter HRM series
- HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
- HRM series.pdf INQUIRY NOW
- Nylon 66 sterilizing grade filter cartridge
- Eternalwater EYNN Series--Filter cartridges are made of natural hydrophilic nylon (Nylon) 66 membrane, which can absorb and remove particles, bacteria and endotoxin smaller than the filtration precision. High porosity and high flow rate are suitable for alkaline liquid filtration.
- EYNN Series.pdf INQUIRY NOW
- Seven-core capsule filter Used for high flow rate EAH Series
- EAH Series seven-core capsule filter adopts an integrated design. On the basis of meeting the gradient winding structure of the polypropylene filter material, the filter area is increased by increasing the number of winding filter elements, effectively improving the filtration efficiency, thereby achieving the effect of long service life.
- EAH Series.pdf INQUIRY NOW
- Strong adsorption capacity activated carbon fiber filter cartridge
- Eternalwater EJA Series--High-performance purification grade activated carbon fiber filter cartridges adopt ACF material, which has high flow rate and high retention rate performance, and is used for purification, deodorization, decolorization, and organic matter removal. Effectively filter out residual chlorine in liquid and gas.
- EJA Series.pdf INQUIRY NOW
- Outside pressure large flow filter cartridge EMD Series
- EMD series high-flow filter cartridge adopts high-performance polypropylene membrane/glass fiber membrane, and the pleated design makes the filter cartridge have a larger effective filtration area. Ergonomically designed end handles ensure quick and easy installation and removal. The twist-to-lock design provides a reliable mechanical seal.
- EPD Series.pdf INQUIRY NOW
- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW
- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW
- KBLV0225TG Sterilizing grade capsule filter 5inch KB Series
- Eternalwater KB series--KBLV0225TG Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
- KB Series.pdf INQUIRY NOW
- Liquid filter bag ELD series
- ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and
colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
- ELD series.pdf INQUIRY NOW
- Hydrophobic gas sterilization polyethersulfone (PES) filter cartridge
- Eternalwater EST Series--Gas sterilization polyethersulfone filter cartridges adopt
hydrophobic polyethersulfone membrane,which has superior performance of high flow
rate, low pressure drop, high temperature resistance and high retention rate. Mainly
used in gas sterilization and filtration of biological fermentation, pharmaceutical industry
- EST Series.pdf INQUIRY NOW
- Hydrophilic PTFE sterilization grade filter cartridge
- Eternalwater ELT Series--Sterilizing filter cartridges adopt hydrophilic polytetrafluoroethylene
(PTFE)membrane. Filter cartridge does not require pre-wetting passes Pseudomonas diminuta
(ATCC ® 19146) retention test. It can be used for sterilization and filtration of medicinal liquids
Hydrophilic PTFE sterilization grade filter cartridge ELT Series
containing organic solvents in the pharmaceutical industry
- ELT Series.pdf INQUIRY NOW
- Metal filter cartridge
- Eternalwater EWK series--metal filter cartridges are made of five layers of 316L or 304 stainless steel sintered mesh by vacuum sintering or stainless steel dense mesh by folding and welding. It has the properties of high pressure resistance, high temperature resistance, corrosion resistance, good mechanical properties and easy regeneration. Suitable for liquid filtration under high temperature and high pressure conditions.
- EWK Series.pdf INQUIRY NOW
- Single core sanitary liquid filter HY1 Series
- Single core stainless steel liquid filter, made of SUS316L stainless steel. One filter cartridge is used as the filter cartridge, and the design meets the requirements of sanitation and GMP. Mechanical polishing, no sanitary dead corners, small flow resistance, acid and alkali resistance, corrosion resistance, convenient cleaning and disinfection, etc. It is suitable for the filtration of small flow in the pharmaceutical and food industries.
- HY1 Series.pdf INQUIRY NOW
- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW
- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical