Home About Us Application Products FAQs News Contact us
EN EN
Products

Home Products EDP Series
Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)

Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)

Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
  • Product features
  • High dirt holding capacity and long service life
    Gradient pore, gradient retention
    Efficient particle interception rate, protection of terminal sterilization and filtration Pure polypropylene material, widely chemical compatibility
    No fiber shedding, economical and practical
  • Industry Application
  • Pre-filtration of Colloidal material Liquid
    filtration of high viscosity
    Filtration of culture media
    Filtration of fermentation solution
    Pre-filtration of blood products
  • DOWNLOAD
  • INQUIRY NOW
PRODUCT DESCRIPTION
  • Filter Material:
  • Polypropylene fiber membrane
  • Center core / Housing / End cap Material:
  • Polypropylene
  • Cage material:
  • Polypropylene
  • Vent O-ring Material:
  • Silicone/ EPDM/ Viton
  • Filtration area:
  • ≥0.4m²/10inch
  • Maximum working temperature:
  • 80℃
  • Maximum working:
  • 4.2bar@23℃（forward direction)
  • pressure difference:
  • 2.4bar@80℃（forward direction）
  • Sterilization:
  • 126℃/30min； high pressure steam sterilization；≥30 times
  • Endotoxin:
  • ＜0.25EU/mL
  • Extractable matter:
  • ＜30mg/10inch
  • Biocompatibility:
  • All materials comply with biosafety evaluation of plastic USP<88>, ClassVI-70°C level
Ordering Information
  • Series
  • EDP Series
  • Micron Rating
  • 010=0.10μm
  • 020=0.20μm
  • 045=0.45μm
  • 065=0.65μm
  • 100=1.00μm
  • 500=5.00μm
  • End cap type
  • J1=222/Fin
  • J2=222/Flat
  • J3=226/Fin
  • J4=226/Flat
  • J5=DOE
  • Length
  • 05=5"
  • 10=10"
  • 20=20"
  • 30=30"
  • 40=40"
  • O-ring
  • S=Silicone
  • E=EPDM
  • V=Viton
  • core
  • A=PP core
  • B=PP Cage material + End cap type lined with stainless steel
    • related products
    • Subscribe for Join Us!
    • Join us and get detail information,technical parameter and new products etc.
    CopyRight © Hangzhou Eternalwater Filtration Equipment Co., Ltd. 2002-2024