External pressure melt-blown (PP cotton) filter cartridge ERP Series

External pressure melt-blown (PP cotton) filter cartridge ERP Series

ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
  • Product features
  • Smooth surface:no fiber shedding, gradient aperture
    Grooved surface :grooves increase the effective filtration area, large flux,and high dirt holding capacity.
    The fine-grained type :has dense internal fibers and an interception rate of up to 95%. Orange peel type :is delicate and compact, with high mechanical strength,high pressure resistance and no shedding.
    Matte surface :tangled filament polypropylene fiber, no shedding, super highdirt holding capacity
    Acupuncture type :acupuncture groove technology, larger filter area and stronger dirt holding capacity
  • Industry Application
  • Industrial water treatment
    ROSecurity filtering system
    Purification of water for various processes
    Industrial water filtration
    Industrial water, electroplating filtration
    Chemical filtration
    Chemical raw material filtration
    Organic solvent filtration
  • DOWNLOAD
  • INQUIRY NOW
PRODUCT DESCRIPTION
  • Length:
  • 5 " 10 " 20 " 40 "
  • Outer diameter:
  • 60mm, 62mm, 65mm
  • Inner diameter:
  • 28mm, 30mm
  • Filter material:
  • Polypropylene(PP)
  • Cage:
  • Polypropylene(PP)
  • End cap:
  • DOE, 222/fin, 226/fin
  • Material of Sealing O-ring:
  • EPDM、Red silicone、Buna-N
  • Removal Rating:
  • 0.5μm、1μm、3μm、5μm、10μm、 20μm、50μm、100μm
  • Maximum working temperature:
  • polypropylene (PP) 60 °C
  • Maximum working pressure drop:
  • Polypropylene (PP) 3bar
  • Recommended pressure drop for filter cartridge replacement :
  • 1.5 Bar, 20°C
  • Flow direction:
  • from outside to inside
Ordering Information
  • Series
  • ERP Series
  • Material
  • P=PP
  • Micron Rating
  • 050=0.5μm
  • 100=1μm
  • 300=3μm
  • 500=5μm
  • 1000=10μm
  • 2000=20μm
  • 10000=100μm
  • End cap tpye
  • J1=222/fin
  • J2=222/flat
  • J3=226/fin
  • J4=226/flat
  • J5=DOE
  • Length
  • 05=5 ′′
  • 10=10 "
  • 20=20 "
  • 30=30 "
  • 40=40 "
  • Structure
  • A=Smooth type
  • B= Grooved type
  • C= Fine lines type
  • D= Needle- punched Type
  • E= Rough type
  • F= Orange peel type
  • Center rod
  • Y=PP skeleton
  • N=no skeleton
    • Subscribe for Join Us!



    • Join us and get detail information,technical parameter and new products etc.
    CopyRight © Hangzhou Eternalwater Filtration Equipment Co., Ltd. 2002-2024